moog-k201176 | 31.75mm Front Sway Bar Bushings | 01-06 Chevy Silverado

  • moog-k201176 360image 1
  • moog-k201176 Front Sway Bar Bushing Kit - 31.75 mm (1.25 Inch)
  • moog-k201176 Front Sway Bar Bushing Kit - 31.75 mm (1.25 Inch)
  • moog-k201176 Front Sway Bar Bushing Kit - 31.75 mm (1.25 Inch)
  • moog-k201176 Front Sway Bar Bushing Kit - 31.75 mm (1.25 Inch)
  • moog-k201176 Front Sway Bar Bushing Kit - 31.75 mm (1.25 Inch)
  • moog-k201176 360image large 1

Front Sway Bar Bushing Kit - 31.75 mm (1.25 Inch)

Manufacturer: MOOG
Part Number: moog-k201176
Price: $24.80

check_box In Stock check_box Ships Immediately


Suggested part for moog-k201176: dll120
dll120 Front Sway Bar Lateral Locks - 19-20mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Sway Bar Bushing Kit - 31.75 mm (1.25 Inch) moog-k201176 fits these vehicles:

moog-k201176 | 31.75mm Front Sway Bar Bushings | 01-06 Chevy Silverado

31.75mm Front Sway Bar Bushings '09-'14 GMC Savana | '01-'06 Chevy Silverado + '09-'14 Express

Moog's Problem Solver 31.75mm Sway Bar Bushings with Synthetic Fabric Liner will replace the worn or squeaky sway bar bushings on several Chevy/GMC pickups and vans. These bushings will restore the body roll reduction of the factory sway bar and have a synthetic lined inner diameter which eliminates the need for grease and extends the life of the part.

*Some of the vehicles in these year models have a larger or smaller sway bar that requires 33.3mm, 30.16mm or 28.57mm front sway bar bushings, so it's advised that you measure your sway bar before purchasing your bushings.

31.75mm front sway bar bushings chevy gmc
worn original sway bar bushing

Is This "Holding" Your Sway Bar?

If you've noticed your Chevy truck or van isn't handling well when taking a corner or the body is rolling to the outside then your sway bar bushings may be worn down. The sway bar connects the wheels on the driver's and passenger's side, keeping both tires on the ground as much as possible, giving you more traction.

Making sure you have traction during a sharp turn is important, especially if you're hauling something down a back road in the dark and a cow wanders into your path (not so strange in Erath County, TX). This is an extreme example, but you never know when you might need to make some evasive maneuvers in your Chevy or GMC. You want your suspension in tip-top shape to handle those situations and Moog can help.

Longer Lasting

Moog's 31.75mm Problem Solver Sway Bar Bushings with a PTFE Synthetic Fabric Lining will restore the turning performance of your Avalanche or Sierra, and they also last longer than OE bushings thanks to the lining. You won't have to worry about how much grease is left between your sway bar bushing and the bar (you were worried, right?) since the synthetic fabric lining eliminates the need for grease altogether.

The OE bushings that came with your Chevy or GMC can begin to squeak with wear or lack of grease, but Moog's Problem Solver Sway Bar Bushings will keep your ride quiet and won't need routine maintenance to do it.

synthetic fabric lined 31mm front sway bar bushing
moog 31mm front sway bar bushings

Install and Forget

Moog labels these bushings "Problem Solvers" because they strive to give you a bushing that fixes any flaws in the design of the OE bushings that came on your Chevy truck or SUV. In the case of their Synthetic Fabric Lined Sway Bar Bushings the longevity increase over OE bushings is 3 times longer.

Besides the quieter operation, these bushings are much more easily installed compared to other replacement options. With the split design, these bushings can be slipped onto the sway bar without having to unbolt it from the suspension. Once on the bar, these bushings will be held in place with the original brackets and you don't have to worry about greasing them for the life of the bushing, which is three times longer than the original.

MOOG moog-k201176

Product Reviews for moog-k201176 | 31.75mm Front Sway Bar Bushings | 01-06 Chevy Silverado

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k201176

5 out of 5 based on 1 user reviews. Write a Review

M
verified_user

starstarstarstarstar" high quality "

Exactly what I ordered and needed.

verified_user Verified Buyer - - . MOOG moog-k201176 - 5 out of 5
Fitment for moog-k201176

question_answer Customer Questions and Answers


Question:
What material is this bushing k201176made of? i.e. rubber, thermoplastic, urethane, or something else.
Answer:
Part number moog-k201176 is made of rubber, but it has the Teflon or PTFE lining inside of it, this helps the bushing last longer and not require any grease.