unarchive In The Box of moog_packagedeal005 keyboard_arrow_down
- K9011 Qty2
- ES483R Qty1
- ES487L Qty1
- ES486L Qty1
- ES489R Qty1
- ES458S Qty2
add_shopping_cart Suggested Parts 1keyboard_arrow_down
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
This is Moog Package Deal 005: A complete front end steering pack for the 1971 to 1973 Datsun 510.
Moog Front End Steering Package Deal 005
When restoring a 70s Datsun, the steering parts are vital. Identifying the correct ball joint alone can be a little tricky, so trying to find an entire steering package can be intimidating. But here at Diverse Suspension Technologies, we have taken the guesswork and difficulty out of the picture. This is Moog Package Deal 005: A complete front end steering pack for the 1971 to 1973 Datsun 510. Replacing your OE parts with Moog's problem solver front end parts will give your Datsun the performance and the dependability that OE parts couldn't provide even when they were new.
Steering Parts Included
Moog Package Deal 005 has been created right here at DST and includes all of the front end steering parts for your truck at a premium discount. Included in this kit are the front lower ball joints for both the driver and passenger side. All four tie rods are included in this pack as well, accompanied with two tie rod adjusting sleeves. The Problem Solver line is Moog's top line of parts. Through extensive research and engineering, these problem solver parts target factory original problems and provide a new part to outlast and outperform the OE part.
Moog's "Problem Solver" Ball Joints
Starting with the ball joints, we have the upper and lower ball joint for each side. Your ball joints are mounted in the control arm or spindle. Inside this part is a ball joint stud that swings to compensate for the up and down movement in your suspension. So your ball joint basically works simultaneously for the steering and suspension. Once your ball joint fails due to rust or factory defect, your truck will being to pull to either side, your steering wheel will have extra play, your front end will shake and your tires will wear prematurely and unevenly. So with all that being said, it is vital that you choose a replacement ball joint that is dependable.
Moog's problem solver ball joints are just that, dependable. Designed with a grease-able design and a hardened steel stud, these ball joints are durable and easily serviced to ensure a long life. Included with the ball joints are zerk grease fittings and neoprene dust boots to seal in the grease and keep out harmful road contaminants.
Tie Rod Ends
Also included in Package Deal 005 are all four tie rod ends you need. There are two outer tie rods, one for each side. As well as two inner tie rods, one for each side. The tie rod is a major pivot point in the steering system. Like the ball joints, the tie rod has a ball and socket design on one side that connects to the steering arm. When your steering wheel moves, this ball and socket allows the wheels to turn. With Moog's problem solver tie rod ends, you can ensure that your vehicle's steering ability is increased and stays dependable.
Tie Rod End Adjusting Sleeves
Lastly in the package are the two tie rod end adjusting sleeves. These sleeves are coated for corrosion resistance and are made of steel for durability. The adjusting sleeves join the tie rod ends to the steering linkage and allow your Datsun to be aligned properly. All Moog Problem solver steering components are backed with a lifetime warranty handled in house at DST. If you have any questions be sure to give us a call or hit the live chat button.
Product Reviews for moog_packagedeal005 | Front End Steering Rebuild Kit | Datsun 510 1971-1973
- 5 Star (1)
- 4 Star (0)
- 3 Star (0)
- 2 Star (1)
- 1 Star (0)
starstarstar_borderstar_borderstar_border" Most everything is fine... "
Everything in the package is great with the exception of one inner tie rod in the kit. The tie rod was a different brand compared to the others and came with no hardware. Once more, it looked NOTHING like the rest of the kit and didnt even use a castle nut... instead it had a nyloc in place. When you're trying to restore a car, discrepancies like this are unacceptable.verified_user Verified Buyer - Joel - . MOOG moog_packagedeal005 - 2 out of 5
starstarstarstarstar" awsome "
Nice kit, easy to install, and makes a 40 year old car feel brand new.verified_user Verified Buyer - Robert Toth - . MOOG moog_packagedeal005 - 5 out of 5