moog-es800273 | Outer Tie Rod End | Land Rover Discovery 94-99

  • moog-es800273 Front Outer Tie Rod End - At Pitman Arm

Front Outer Tie Rod End - At Pitman Arm

Manufacturer: MOOG
Part Number: moog-es800273
Price: $27.54

check_box In Stock check_box Ships Immediately

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.


    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Outer Tie Rod End - At Pitman Arm moog-es800273 fits these vehicles:

moog-es800273 | Outer Tie Rod End | Land Rover Discovery 94-99

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.

Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

Fitment for moog-es800273
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
Land RoverDefender 1101993Right Outer Quantity 1
Land RoverDefender 901997-1994Right Outer Quantity 1
Land RoverDiscovery1999-1994At Knuckle Quantity 1
Land RoverDiscovery1999-1994Outer Quantity 2
Land RoverRange Rover1995Right Outer Quantity 1 3.9L V8 3950cc
Land RoverRange Rover1995Right Outer Quantity 1 4.2L V8 4200cc
Land RoverRange Rover1994-1987Right Outer Quantity 1