moog-ck8710t | Front Upper Control Arm | 1995-2003 Ford Explorer

  • moog-ck8710t Front Upper Control Arm - 2 Piece Design Arm - Passenger Side - No Price Available
  • moog-ck8710t Front Upper Control Arm - 2 Piece Design Arm - Passenger Side - No Price Available
  • moog-ck8710t Front Upper Control Arm - 2 Piece Design Arm - Passenger Side - No Price Available
  • moog-ck8710t Front Upper Control Arm - 2 Piece Design Arm - Passenger Side - No Price Available
  • moog-ck8710t Front Upper Control Arm - 2 Piece Design Arm - Passenger Side - No Price Available

Front Upper Control Arm - 2 Piece Design Arm - Passenger Side - No Price Available

Manufacturer: MOOG
Part Number: moog-ck8710t
Price: $101.60

check_box In Stock check_box Ships Immediately

Suggested part for moog-ck8710t: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.


    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Upper Control Arm - 2 Piece Design Arm - Passenger Side - No Price Available moog-ck8710t fits these vehicles:

moog-ck8710t | Front Upper Control Arm | 1995-2003 Ford Explorer

2001 Ford Explorer
  • Fits submodels: Eddie Bauer, Limited, Postal, XLS, and XLT
1998-2003 Ford Ranger, 1999 Mazda B2500, 1998-2004 Mazda B3000, and 1998-2004 Mazda B4000
  • Fits vehicles with Front Torsion Bar Springs
  • For vehicles with Front Coil Springs use ck80052
For driver side use ck8710t

Fits 2 Piece design arms only. For 1 piece design use ck80068

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

MOOG moog-ck8710t

Product Reviews for moog-ck8710t | Front Upper Control Arm | 1995-2003 Ford Explorer

5 Star (1)
4 Star (0)
3 Star (0)
2 Star (0)
1 Star (0)

MOOG moog-ck8710t

5 out of 5 based on 1 user reviews. Write a Review


starstarstarstarstar" Nice parts. "

Fit well. Good service.

verified_user Verified Buyer - - . MOOG moog-ck8710t - 5 out of 5
Fitment for moog-ck8710t
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordExplorer2001-1995Front Right Upper Quantity 1
FordExplorer Sport2003-2001Front Right Upper Quantity 1
FordExplorer Sport Trac2005-2001Front Right Upper Quantity 1
FordRanger2003-1998Front Right Upper Quantity 1
MazdaB25001999Front Right Upper Quantity 1
MazdaB30002004-1998Front Right Upper Quantity 1
MazdaB40002004-1998Front Right Upper Quantity 1
MercuryMountaineer2001-1997Front Right Upper Quantity 1

question_answer Customer Questions and Answers

Hello, if I'm changing (converting) my passenger (right) upper side control arm from the two piece to a single piece using ck80068 will I also need the Front Caster and Camber Cam and Bolt Kit = k80065? Would like to make sure I have everything I need before starting this job. Also I would use the same existing bolts for the drivers side upper control arm correct? And I'm presuming I will need to have a wheel alignment done after I'm done with this? Is this correct? Is it a wheel alignment or is it called something else?
The ck80068 will replace the 2 piece control. I would install the k80065 cam bolt too. If you are replacing the driver's side control arm ck8708t I would replace the OEM bolt with the cam bolt with k80065 while I was there. Yes you would need to have e the alignment done after those repairs. ...see more

I'm looking to replace the right side (passenger) upper control arm. My vehicle has the two piece design. I'm looking to replace both pieces. I don't see the inner half with the bushings listed. Can you please provide a part number for the complete 2piece arm?
Moog only makes the outer part for the 2 piece upper arm. It is rk8710 and ck8710t. The bushing for the inner arm for a 2 piece arm is k8704. You can replace the 2 piece arm for the one piece arm Moog offers. It does not effect the alignment or handl ling of the vehicle. The arm is rk80068 or ck80068. ...see more

What is the difference between rk8708 rk8708t?
RK8708 is a once piece design control arm. CK8710T is a two-piece design control arm.

want to replace both upper control arms. what part numbers will work. I have bad upper control arm bushings.if I have 2 pc upper control arms, can I retrofit it with one piece arms and a cam -caster bolt kit.
I checked with our mechanic here and he said you can change from a two piece control arm to a one piece it's not a problem.

Is part number ck8710t pre-greased? If not, how much grease do I need to pump in?
No, part number ck8710t is not pre-greased. You will need to pump grease in until you see the dust boot swell slightly.