Moog's W2300 Series - PTO Replacements for the German Style Waltersheid 2300 Series
OEM Rated Capacity: 37HP @ 540RPM and 57HP @ 1000RPM
The part numbers below work for the German Style Waltersheid 2300 Series for OEM Rated Capacity: 37HP @ 540RPM and 57HP @ 1000RPM.
Cross and Bearing Kit
| Image | A | B | C | Grease Fitting | Part Number |
|---|---|---|---|---|---|
 |
2.94" (74.6mm) | 1.063" (27mm) | 3.31" (84mm) | Grease Fitting in Cross | 344AG |
Quick Disconnect Yoke
Slide Lock
| Image | Bore | Spline | Part Number |
|---|---|---|---|
 |
1-3/8" | 6 | 2033 |
End Yokes
Round Bore with Keyway & Set Screw
| Image | Bore | Keyway | Part Number |
|---|---|---|---|
 |
1-1/4" | 1/4" | 1026 |
 |
1-3/8" | 5/16" | 1027 |
 |
1-1/2" | 3/8" | 1037 |
Round Bore with Hole for Shear Pin
| Image | Bore | Keyway | Part Number |
|---|---|---|---|
 |
1-1/4" | 1/4" | 1034 |
Drive Shaft Components
| Part Type | Image | Measurements | Part Number |
|---|---|---|---|
| Inner Tube Yoke |  |
Bore 1.36" (34.5mm) | 1644 |
| Outer Tube Yoke |  |
Bore 1.62" (41.25mm) | 1654 |
| Inner Profile Tube |  |
1.36" x 59" (34.5mm x 1500mm) | 1662 |
| Outer Profile Tube |  |
1.62" x 59" (41.25mm x 1500mm) | 1672 |
| Roll Pin |  |
0.42" x 2.57" (10mm x 65mm) | 1084 |
| Plastic Safety Shield (bearing not included) |
 |
- | 2071 |
