moog-rk620680 | Front Right Upper Control Arm | 86-95 Toyota 4Runner

  • moog-rk620680 Front Control Arm and Ball Joint - Passenger Side
  • moog-rk620680 Front Control Arm and Ball Joint - Passenger Side

Front Control Arm and Ball Joint - Passenger Side

Manufacturer: MOOG
Part Number: moog-rk620680
Price: $145.98

check_box Free Shipping!check_box In Stock check_box Ships Immediately


Suggested part for moog-rk620680: moog-rk620681
moog-rk620681 Front Upper Control Arm And Ball Joint - Driver Side
Front Upper Control Arm And Ball Joint - Driver Side

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Control Arm and Ball Joint - Passenger Side moog-rk620680 fits these vehicles:
Details

moog-rk620680 | Front Right Upper Control Arm | 86-95 Toyota 4Runner

1986-1995 Toyota Pickup and 1993-1998 Toyota T100
  • Fits 4WD models ONLY

For the driver side use rk620681

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

MOOG moog-rk620680

Product Reviews for moog-rk620680 | Front Right Upper Control Arm | 86-95 Toyota 4Runner

5 Star (4)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-rk620680

5 out of 5 based on 4 user reviews. Write a Review

D
verified_user

starstarstarstarstar" Great "

Truck restored.

verified_user Verified Buyer - - . MOOG moog-rk620680 - 5 out of 5
D
verified_user

starstarstarstarstar" Great "

Truck restored.

verified_user Verified Buyer - - . MOOG moog-rk620680 - 5 out of 5
D
verified_user

starstarstarstarstar" Great "

Truck restored.

verified_user Verified Buyer - - . MOOG moog-rk620680 - 5 out of 5
A
verified_user

starstarstarstarstar" Review 1 Year Later "

Fantastic.

verified_user Verified Buyer - - . MOOG moog-rk620680 - 5 out of 5

question_answer Customer Questions and Answers


Question:
Does the replacement upper control arm you sell have poly bushings or the factory rubber style?
Answer:
All Moog control arms have rubber bushings.

Question:
Do the front upper control arms come with bushings?
Answer:
moog-rk620680 does include the bushings and ball joints installed.

Question:
Moog-RK620680 Front Upper Control Arm - control arm does it fit a 89-96 4x4 Toyota 4Runner ln130.
Answer:
Part number Moog-RK620680 is fitted for the 86-95 4x4 4runner, it will not fit a 96 4runner.

Question:
Do your new upper control arms have polyurethane bushings or rubber?
Answer:
Moog control arm bushings are rubber. Moog does not offer poly urethane bushings for control arms.

Question:
Is the moog-rk620680 part made with polyurethane bushings? If not is there an assembly that is available with polyurethane bushings?
Answer:
Moog control arm bushings are rubber. Moog does not offer poly urethane bushings. You would have to Energy Suspension, Prothane, Whiteline, SuperPro, Daystar and Pedders products.