moog-k90344 | Front Sway Bar End Link Replacement | Lexus RX330

  • moog-k90344 Front Sway Bar End Link
  • moog-k90344 Front Sway Bar End Link

Front Sway Bar End Link

Manufacturer: MOOG
Part Number: moog-k90344
Price: $43.54

check_box In Stock check_box Ships Immediately


  • Qty 1 Stabilizer Bar Link (Not sold in pairs)
Suggested part for moog-k90344: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
Grease Gun Combo

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

Cross Reference from moog-k90344 to beckarnley-101-4907
Beck Arnley beckarnley-101-4907
. Standard OE replacement.
Price: $51.22
Warranty: 3 Years or 50000 Miles

question_answer Ask us a Question

FitmentFront Sway Bar End Link moog-k90344 fits these vehicles:
Details

moog-k90344 | Front Sway Bar End Link Replacement | Lexus RX330

Includes One Complete Link

Moog's Sway Bar Endlinks

A sway bar, or anti-roll bar, is designed to keep all four wheels solidly in contact with the road, track, or trail during a turn. But your sway bar doesn't do this job alone. Sway bar endlinks connect the sway bar to the rest of your suspension. Without these links your sway bar would just hang there, taking up space. Similarly, if your links are damaged or worn then your sway bar will not be performing at it's best.

Moog's line of sway bar endlinks come in a variety of shapes and styles, each one designed specifically for the vehicle it's listed for. Known for their high-quality parts, Moog stays true to form with each of their endlink designs. Maximize your vehicle's performance and value with a set of Moog's sway bar endlinks, all covered by Moog's lifetime warranty handled in-house here at DST.

Moog's Sway Bar Endlinks Box
MOOG moog-k90344

Product Reviews for moog-k90344 | Front Sway Bar End Link Replacement | Lexus RX330

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k90344

5 out of 5 based on 2 user reviews. Write a Review

O
verified_user

starstarstarstarstar" Nicely made link. "

Appreciate the 11/16 locking nut on the ball joint that allows you to torque the holding nut

verified_user Verified Buyer - - . MOOG moog-k90344 - 5 out of 5
J
verified_user

starstarstarstarstar" Good part "

This is a good part.

verified_user Verified Buyer - - . MOOG moog-k90344 - 5 out of 5
Fitment for moog-k90344
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
LexusES3002003-2002Front Quantity 2
LexusES3302006-2004Front Quantity 2
LexusRX3302006-2004Front Quantity 2
LexusRX3502017-2007Front Quantity 2
LexusRX400h2008-2006Front Quantity 2
LexusRX450h2017-2010Front Quantity 2
ToyotaAvalon2012-2005Front Quantity 2
ToyotaCamry2006-2002Front Quantity 2
ToyotaHighlander2017-2001Front Quantity 2
ToyotaSolara2008-2004Front Quantity 2
ToyotaVenza2015-2009Front Quantity 2

question_answer Customer Questions and Answers


Question:
Center to center length?
Answer:
The center to center length is 9.842 inches.

Question:
I replaced both of my front sway bar endlink with Moog greaseable endlink. I pumped grease before installation and grease leaked from the boot, is that normal or did I messed it up.
Answer:
As long as you did not rupture or cut the boot the end link should be ok. The end link was probably over filled with grease and the excess grease come out of the pressure relief. Much easier and less messy to grease the end link after it is installed d. ...see more

Question:
I just installed sway bar links on my Camry today and I had a question about greasing. I used a grease gun and put grease in until the rubber felt solid and I turned the wheel back and fourth and I checked the links and grease came out. Is the grease supposed to leak out like that? Could the rubber boot be ruptured because I over greased?
Answer:
Need to look at the dust boot to make sure it did not rupture. If it did not tear their is a grease relief at the top. It it is over filled it will come out the small end of the dust boot.

Question:
What are the thread specifications of the zerk fittings for both the MOOG K90344?
Answer:
The grease zerks are 1/4x28 self tapping threads.

Question:
How often should these links be re-filled with grease? I have the K90345 on the rear as well. If it helps, I live in New Jersey and never drive off-road.
Answer:
You will have to grease parts upon installation and every oil change.

Question:
Is part number k90344 for the left and right sides of the vehicle?
Answer:
Yes, part number k90344 will fit both the passenger and driver sides.