moog-k80796 | Pitman Arm | Ford F-250 Super Duty 4wd 1999-2004

  • moog-k80796 Pitman Arm - with 36 Tooth Design
  • moog-k80796 Pitman Arm - with 36 Tooth Design

Pitman Arm - with 36 Tooth Design

Manufacturer: MOOG
Part Number: moog-k80796
Price: $60.94

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentPitman Arm - with 36 Tooth Design moog-k80796 fits these vehicles:
Details

moog-k80796 | Pitman Arm | Ford F-250 Super Duty 4wd 1999-2004

Fits Models with 36 Tooth Design with monobeam front axle

Moog Pitman Arms

Pitman arms are designed to connect your steering box to your center link or drag link. The force you apply when turning your steering wheel travels through the pitman arm and is then used to move the links and rotate your wheels. As the proverbial "middle man" of your steering system, the pitman arm is incredibly important. A worn pitman arm will have an obvious affect on your handling. Sloppy or unresponsive steering, as well as wobbling and vibrations while driving, are common signs of a worn pitman arm. Moog offers its series of pitman arms, all made to meet or exceed OE specifications. Crafted as solid, one-piece components, Moog's pitman arms are well equipped to both outperform and outlast the OE. By upgrading to a Moog pitman arm, you'll not only restore your vehicle's steering performance, but you'll also make it last much longer. Additionally, Moog covers all of their pitman arms with a lifetime warranty handled in-house here at DST.

*Some kits include all new hardware including castle nut, cotter pin, etc. If you need new hardware check to be sure it is included in the kit.

Moog Box
MOOG moog-k80796

Product Reviews for moog-k80796 | Pitman Arm | Ford F-250 Super Duty 4wd 1999-2004

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k80796

5 out of 5 based on 2 user reviews. Write a Review

C
verified_user

starstarstarstarstar" Very good "

These are the genuine Moog parts. Quick shipment after I placed the order.

verified_user Verified Buyer - - . MOOG moog-k80796 - 5 out of 5
G
verified_user

starstarstarstarstar" Time will tell "

Slightly shorter than the stock unit. Didnt seem to make a big difference. I was able to adjust the tie rod ends to make up for the difference.

verified_user Verified Buyer - - . MOOG moog-k80796 - 5 out of 5
Fitment for moog-k80796
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordExcursion2004-2000 Quantity 1
FordF-250 Super Duty2004-19994WD Quantity 1
FordF-350 Super Duty2004-1999 Quantity 1

question_answer Customer Questions and Answers


Question:
I just ordered a Front End Steering Rebuild Package Kit for my 2002 F250 Super Duty from Moog now my question is I have a 2 1/2
Answer:
k850796 is correct for your F250 You would need to contact the lift company to see if you need a pitman arm other than OEM.

Question:
What is the length of part number k80796?
Answer:
Part number k80796 has a length of 6.50 inches.

Question:
What is the length of part number k80796?
Answer:
Part number k80796 has a length of 6.50 inches.