lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
moog-k80154 | Front End Alignment Kit | Ford F250 Super Duty 05-17
Moog Alignment Parts
Caster or Camber issues? Moog has got you covered with their line of alignment parts. Moog's engineers have designed this part to give you adjustability and flexibility with the alignment angles in your suspension. Whether caster, camber, or both, Moog's alignment parts will set your suspension up better than when you first drove the vehicle off the lot.
question_answer Customer Questions and Answers
- Question:
- Will part number k80154 fit my 2018 F350 4WD?
- Answer:
- Yes, part number k80154 will fit the 2018 F350 4WD. It will fit up to the 2019.
- Question:
- Does your caster bushing kit #K80154 come with 2 bushings or 1?
- Answer:
- Moog's caster bushing K80154 is sold individually, 2 are required per vehicle.
- Question:
- Can this be set to absolute zero??
- Answer:
- moog-k80154 can be set at true 0 degree.
- Question:
- Would I need to order 2 of these prior to the alignment?
- Answer:
- If you need to properly align the pickup you would need 2 adjust the left and right side camber/caster.
- Question:
- My f350 has 12 inch lift and 40s..would these shims still help support positive castor for this type of large application.
- Answer:
- The camber/castor bushing k80154 is adjustable up to 2.5 degrees. It could work. Depends on how much of a change you need.
- Question:
- Are these just for top ball joint?
- Answer:
- moog-k80154 will only fit where the upper ball joint goes through the tapered hole in the spindle.