moog-k700542 | Front Sway Bar End Link Kit | Dodge Ram 1500 1994-2001

  • moog-k700542 360image 1
  • moog-k700542 Front Sway Bar End Link
  • moog-k700542 Front Sway Bar End Link
  • moog-k700542 Front Sway Bar End Link
  • moog-k700542 Front Sway Bar End Link
  • moog-k700542 360image large 1

Front Sway Bar End Link

Manufacturer: MOOG
Part Number: moog-k700542
Price: $15.32

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Sway Bar End Link moog-k700542 fits these vehicles:
Details

moog-k700542 | Front Sway Bar End Link Kit | Dodge Ram 1500 1994-2001

Premium Sway Bar Link Kit
Will Need Two to replace Left and Right

Moog has engineered a new line of end links to enhance durability and performance.

Moog Problem Solver: Sway Bar End Links

Raising the bar

Moog's Problem Solver sway bar link kits have raised the bar for OE replacement links. Targeting the easily corroded traditional non-socket style links, Moog has engineered a new line of end links to enhance durability and performance. The entire line of Moog's Problem Solver end links are available right here at DST and include a lifetime warranty.

Moog Problem Solver Bulletins: Sway Bar Endlinks
Moog Problem Solver Bulletins: Sway Bar Endlinks

Original design and other supplier's flaws

The traditional non-socket style sway bar link that is installed factory on vehicles is highly susceptible to early failure. The OE design, as well as many aftermarket suppliers, use a small diameter bolt on the sway bar link. This small size bolt opens up the link to the damaging effects of road shock and corrosion. If the smaller bolt isn't bad enough, these links utilize neoprene bushings that do not stand up well to stress and weather conditions. Many suppliers also use a rolled steel sleeve which can allow harmful contaminants in, leading to corrosion and early failure.

Moog problem solving features

Moog's problem solver parts target factory defects or poor original design, replacing them with a better more durable part. Moog's sway bar link set provides enhanced performance and increased durability. This new design includes polyurethane bushings. These polyurethane bushings are much more durable than the neoprene.

Moog Problem Solver Bulletins: Sway Bar Endlinks
Moog Problem Solver Bulletins: Sway Bar Endlinks

Durable hardware

A black oxide 3/8" Grade 8 bolt provides increase strength and corrosion protection. Paired with a barrel nut that provides proper thread engagement, these "problem solving" end links are much easier to install. Nested washers are included to help keep the bushings centered during installation. The T6 aluminum hex spacer keeps contaminants out and is anodized to prevent corrosion.

Sway Bar End link Part Numbers

Moog has engineered several sizes of end links to cover numerous vehicles. While the length varies depending on the vehicle, all of Moog's Problem Solver sway bar end links include these problem-solving features.

Moog Problem Solver Bulletins: Sway Bar Endlinks
MOOG moog-k700542

Product Reviews for moog-k700542 | Front Sway Bar End Link Kit | Dodge Ram 1500 1994-2001

5 Star (16)
89%
4 Star (2)
11%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k700542

5 out of 5 based on 18 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Review 2 Years Later "

Still doing fine, no signs of breaking down.

verified_user Verified Buyer - - . MOOG moog-k700542 - 5 out of 5
T
verified_user

starstarstarstarstar" Review 2 Years Later "

Ok

verified_user Verified Buyer - - . MOOG moog-k700542 - 5 out of 5
D
verified_user

starstarstarstarstar" Quality Construction "

Durable, easy to install, high quality.

verified_user Verified Buyer - - . MOOG moog-k700542 - 5 out of 5
T
verified_user

starstarstarstarstar" Good "

Easy to install & good quality.

verified_user Verified Buyer - - . MOOG moog-k700542 - 5 out of 5

Fitment for moog-k700542
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
DodgeRam 15002001-1994FrontRWD Quantity 2
DodgeRam 25002002-1994FrontRWD Quantity 2
DodgeRam 35002002-1994FrontRWD Quantity 2
FordExplorer2010-1995Front Quantity 2
FordExplorer Sport2003-2001Front Quantity 2
FordExplorer Sport Trac2010-2001Front Quantity 2
FordRanger2011-1998Front Quantity 2
MazdaB23002009-2001Front Quantity 2
MazdaB25002001-1998Front Quantity 2
MazdaB30002007-1998Front Quantity 2
MazdaB40002010-1998Front Quantity 2
MercuryMountaineer2010-1997Front Quantity 2

question_answer Customer Questions and Answers


Question:
Do you need to grease the bushings on part number k700542?
Answer:
No, you will not need to grease the bushings on part number k700542.

Question:
How long is this endlink?
Answer:
Part number moog-k700542 is 9.5 inches long.

Question:
I just purchased sway bar links set for my Ford explore XLT 1996 I read the instructions on how it is to install but to be quite frank I’m not understanding what is too tight or what is to lose as far as fastening the notes to the links
Answer:
Install the end link. Once installed Tighten the nut while spinning the spacer. When you cannot spin the spacer tighten the nut 3-5 additional revolutions. Because the polyurethane bushings have some give there is not a torque spec.

Question:
my truck is lifted and does not take the stock sway bar links, what is the length of the spacer in this kit
Answer:
The overall length on part number moog-k700542 is 9.5 inches and the sleeve length is 5.67 inches.

Question:
What is the length of these sway bar end links?
Answer:
The length on part number moog-k700542 is 9.5 inches.

Question:
Moog-k700542 - 03 Ford Sport Trac- Does this kit include one piece or two to cover both sides?
Answer:
Moog-K700542 is sold as a single endlink per kit. You will need two of this kit to cover both left and right endlinks.