• MOOG-ES354L Front Outer Tie Rod End - Driver Side

Front Outer Tie Rod End - Driver Side

Manufacturer: MOOG
Part Number: MOOG-ES354L


Price: $38.79

In Stock Ships Immediately

  • Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty. Moog warranties their parts to be free of defects in materials and / or workmanship during these timeframes as measured from the date of purchase. If a Moog part should fail due to a materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
FitmentFront Outer Tie Rod End - Driver Side MOOG-ES354L fits these vehicles:

Front Left Inner Tie Rod | 68-71 Jeep Wagoneer | MOOG

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterwards.

Moog Tie Rod Box

Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

Fitment for moog-es354l
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
DodgeW100 Pickup1968Left Outer Quantity 1
DodgeW100 Series1967-1963Left Outer Quantity 1
DodgeW200 Series1967-1963Left Outer Quantity 1
FargoW100 Panel Delivery1967-1966Left Outer Quantity 1
FargoW100 Pickup1968-1966Left Outer Quantity 1
FargoW200 Pickup1967-1966Left Outer Quantity 1
JeepGladiator1967-1963Left Inner4WD Quantity 1
JeepGladiator1967-1963Left InnerRWD Quantity 1
JeepJ-1001973-1968Left Inner Quantity 1
JeepJ-1001973-1968Left Outer Quantity 1
JeepJ-1001967-1965Left Inner4WD Quantity 1
JeepJ-1001967-1965Left Outer4WD Quantity 1
JeepJ-1001964-1963Right Outer (Steering Arm To Steering Arm)4WD Quantity 1
JeepJ-2001965-1963Left InnerRWD Quantity 1
JeepJ-2001964-1963Left Inner4WD Quantity 1
JeepJ-2101965-1963Left InnerRWD Quantity 1
JeepJ-2101964-1963Left Inner4WD Quantity 1
JeepJ-2201965-1963Left InnerRWD Quantity 1
JeepJ-2201964-1963Left Inner4WD Quantity 1
JeepJ-2301965-1963Left InnerRWD Quantity 1
JeepJ-2301964-1963Left Inner4WD Quantity 1
JeepJ-25001966-1965Left InnerRWD Quantity 1
JeepJ-25001966Left Inner4WD Quantity 1
JeepWagoneer1973-1968Left Inner Quantity 1
JeepWagoneer1973-1968Left Outer Quantity 1
JeepWagoneer1967-1965Left Inner4WD Quantity 1
JeepWagoneer1967-1965Left Outer4WD Quantity 1
JeepWagoneer1964-1963Right Outer (Steering Arm To Steering Arm)4WD Quantity 1