moog-ds1462 | Front Left Inner Tie Rod | 00-02 Dodge Ram 2500 | MOOG

  • moog-ds1462 Inner Tie Rod End - Driver Side
  • moog-ds1462 Inner Tie Rod End - Driver Side

Inner Tie Rod End - Driver Side

Manufacturer: MOOG
Part Number: moog-ds1462
Price: $138.76

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentInner Tie Rod End - Driver Side moog-ds1462 fits these vehicles:
Details

moog-ds1462 | Front Left Inner Tie Rod | 00-02 Dodge Ram 2500 | MOOG

Inner Tie Rod End Driver Side. Sits between the Outer Driver Side Tie Rod End and The Passenger Side Connecting Tie Rod. One Side of the Steering Stabilizer Connects to this Tie Rod.

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.

Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

MOOG moog-ds1462

Product Reviews for moog-ds1462 | Front Left Inner Tie Rod | 00-02 Dodge Ram 2500 | MOOG

5 Star (3)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-ds1462

5 out of 5 based on 3 user reviews. Write a Review

N
verified_user

starstarstarstarstar" Review 1 Year Later "

The parts have worked out very well. The 2001 Dodge 2500 4x4 pickup was in serious need of attention, and we also put Source Automotive steering stabilizer kit, and solid track bar upgrade, and Skyjacker shock, and Bilstein shocks on all four corners.\nWith all the work, and parts it is difficult what helped, but at least I can keep it in the road now!\nThank you for your service, and follow up, I hope to replace all the suspension bushings soon! Norm Benson

verified_user Verified Buyer - - . MOOG moog-ds1462 - 5 out of 5
L
verified_user

starstarstarstarstar" Impressed "

Great heavy Duty and east to install

verified_user Verified Buyer - - . MOOG moog-ds1462 - 5 out of 5
D
verified_user

starstarstarstarstar" Good Quality "

Good quality and much better than the generic stuff available at the local parts stores.

verified_user Verified Buyer - - . MOOG moog-ds1462 - 5 out of 5

question_answer Customer Questions and Answers


Question:
Does this part have a grease fitting,
Answer:
Yes it is greasable.

Question:
Can you please tell me the length of part number moog ds1462.
Answer:
moog ds1462 from the center of the tapered stud to the end of the threaded end is 46.350 inches long.

Question:
What is the length on ds1462?
Answer:
The length on part number moog-ds1462 is 46.34 inches.

Question:
WHAT KIND OF GREASE COMES IN THESE PARTS AND WHAT TYPE OF GREASE DO YOU RECOMMEND?
Answer:
After the tie rod is installed you must grease it and every oil change. You would use a HD chassis grease with the NLGI certification. It would be compatible with the grease that Moog used.