moog-512369 | Rear Wheel Hub Assembly | 2009-2014 Dodge Challenger

  • moog-512369 Rear Wheel Bearing and Hub Assembly
  • moog-512369 Rear Wheel Bearing and Hub Assembly
  • moog-512369 Rear Wheel Bearing and Hub Assembly
  • moog-512369 Rear Wheel Bearing and Hub Assembly

Rear Wheel Bearing and Hub Assembly

Manufacturer: MOOG
Part Number: moog-512369
Price: $126.60

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentRear Wheel Bearing and Hub Assembly moog-512369 fits these vehicles:
Details

moog-512369 | Rear Wheel Hub Assembly | 2009-2014 Dodge Challenger

2009 Chrysler 300
  • Fits vehicles with 2.7L V6, 3.5L V6, 5.7L V8, and 6.1L V8 without performance brakes and 32 spline shaft
  • For vehicles with 2.7L V6, 3.5L V6, 5.6L V8, and 6.1L V8 with performance brakes and 27 spline shaft use 512301
2010 Chrysler 300
  • Fits vehicles with 2.7L V6, 3.5L V6, 5.7L V8, and 6.1L V8
2011 Chrysler 300
  • Fits vehicles with 3.6L V6 and 5.7L V8
2012-2014 Chrysler 300
  • Fits vehicles with 3.6L V6, 5.7L V8, and 6.4L V8
2009 Dodge Charger
  • Fits vehicles without performance brakes and 32 spline shaft
  • For vehicles with performance brakes and 27 spline shaft use 512301

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts.

Moog Wheel Bearing and Hub Assemblies

Don't Live With All of Those Noises

Wishing you could get rid of that annoying grinding noise? You've probably been hearing it for a while, and the mechanic just said your wheel bearing and hub assembly needs replacing. Take it from the DST parts experts, go with a premium solution: Moog's wheel bearing and hub assemblies.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

OE Design Flaws

The OE design of wheel bearing and hub assemblies is shoddy at best. Common symptoms of a failed OE wheel hub are:

  • Loose wheels leaning into the vehicle
  • Premature tire wear and poor handling
  • Snapping or clicking noise on turns
  • Humming or rattling when driving straight
  • Anti-lock Braking System (ABS) light is on

If you are experiencing any of these issues, get your vehicle checked out immediately.

Roll Form Design

All of Moog's Wheel Hub Assemblies are engineered to target these OE problems. One such feature is Moog's innovative roll form design. Moog's roll form design ensures consistent and optimal pre-load in your hub. With grease now equally spreading throughout the hub, the longevity of your wheel bearing and hub assembly increases greatly.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

ABS Molded Shield and Socket Connections

Moog's wheel bearing and hubs also feature an ABS with molded shield and socket connections. This provides maximum defense against contamination. With this addition, Moog's hubs are much more resistant to the premature wear that plagues OE hub assemblies.

Moog Abrasion-Resistant ABS Cord

Moog wheel hub assemblies include an ABS cord coated with a blended material designed to provide superior ABS protection. This helps increase abrasion resistance and protects against adverse conditions. Unlike the OE ABS cords, Moog's cords will last longer and resist cuts or rips much better than the OE design.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Quad Lip Seal Design

Moog's hub assemblies come equipped with a quad lip seal design. The design provides a securely-sealed environment that the OE design doesn't have. This, yet again, makes Moog's hubs more resistant to contamination, which will help extend the life of the part.

Precision Match Components

When you buy a Moog wheel hub assembly from our warehouse in Stephenville, you can be assured that the components are precision matched. Moog sees to this by strictly controlling the manufacturing process to ensure exact matching of bearings and rolling elements, delivering superior performance and minimizing noise and vibration.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Coated Wheel Stud Bolts

The wheel studs on Moog hub assemblies feature a protective coating that helps prevent rust and corrosion. The protective coating will allow easier removal and proper torquing of the wheel, cutting down on installation time and any future servicing that you might have.

Parts Engineered to the Highest of Standards

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts. Moog hub assemblies are performance-proven, quality-tested, and are available for many vehicles, both foreign and domestic. If that wasn't enough, Moog's wheel bearing and hub assemblies also come with a 3-year warranty that, if you should ever need it. If you need a little help finding a Moog wheel hub assembly for your vehicle then don't hesitate to call DST's customer service team, they'll be happy to help you with anything you may need.

Moog wheel bearing and hub assembly
Fitment for moog-512369
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
Chrysler3002014-2012Rear Quantity 2 6.4L V8 6424cc/392cid
Chrysler3002014-2011Rear Quantity 2 3.6L V6 3604cc/220cid
Chrysler3002014-2009Rear Quantity 2 5.7L V8 345cid
Chrysler3002013Rear Quantity 2 5.7L V8 5654cc/345cid
Chrysler3002010-2009Rear Quantity 2 2.7L V6 2700cc/167cid
Chrysler3002010-2009Rear Quantity 2 2.7L V6 2736cc/167cid
Chrysler3002010-2009Rear Quantity 2 3.5L V6 3497cc/215cid
Chrysler3002010-2009Rear Quantity 2 6.1L V8 6059cc/370cid
DodgeChallenger2014-2008Rear Quantity 2
DodgeCharger2014-2009Rear Quantity 2

question_answer Customer Questions and Answers


Question:
Does part number Moog-512369 fit the 2010 Dodge Challenger SRT?
Answer:
Yes. Part number Moog-512369 is fitted the rear hub assembly for a 2010 Dodge Challenger SRT.

Question:
Does part number Moog-512369 fit both the 2010 Dodge Charger AWD & RWD?
Answer:
Part number Moog-512369 will fit both the 2010 Dodge Charger AWD & RWD.

Question:
Does MOOG 512369 Wheel Bearing and Hub Assembly come with 1 or 2 assembly?
Answer:
All Moog hub assemblies are sold individually. Not in pairs.