unarchive In The Box of dst-packagedeal226 keyboard_arrow_down
- Front Upper Ball Joint Qty 2
- Front Outer Tie Rod End Qty 2
- Front Inner Tie Rod End Qty 2
- Front Tie Rod Adjusting Sleeve Qty 2
- Front Lower Ball Joint (Varies) Qty 2
add_shopping_cart Suggested Parts 6keyboard_arrow_down
This kit comes with everything you'll need to grease your vehicle.
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.
12" Flex Hose for grease gun.
18" Flex Hose for grease gun.
Smaller grease gun for 3oz tubes
3oz tubes of Lucas Red-N-Tacky Chassis Grease
lock Warranty Information keyboard_arrow_down
WARRANTY:
DST carries a 5-Year Warranty.
DST warrants their parts to be free of defects in materials and/or workmanship during this timeframe as measured from the date of purchase.
If a DST part should fail due to materials or manufacturing defects while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
dst-packagedeal226 | DST Front End Rebuild Kit 226 | '96-'00 Chevrolet K2500
DST Front End Rebuild Kit 226 | '96-'00 Chevrolet K2500 and K3500
![](https://www.suspension.com/images/DST-Front-end-rebuild-kit-226/chevy-k2500-96-00-front-end-rebuild-kit.jpg)
DST Front End Rebuild Kit 226 for the '96-'00 Chevrolet K2500 and K3500 offers everything you need to overhaul your front end, tightening your steering, preventing uneven tire wear, and improving ride quality. Trucks that are used for equipment hauling, towing, or construction jobs are often put under a lot of stress, and expected to endure rough conditions, which can leave your K2500 with loose front end parts. Our front end rebuild kit helps eliminate excess play in your steering and prolong the life of your most reliable vehicle.
Tire Wear Troubles
Vehicles with high mileage or that are continuously driven in rough terrain are most likely going to have worn out tie rods and ball joints. When the rubber dust seals begin to deteriorate or there is insufficient lubrication, dirt and water can corrode the inner workings of your ball joints/tie rods. This can leave you with issues like clunking or grinding noises, misalignment and premature tire wear, or steering problems like veering or wandering.
![](https://www.suspension.com/images/moog-pd068/worn-chevy-gmc-original-ball-joint.jpg)
![](https://www.suspension.com/images/DST-Front-end-rebuild-kit-226/front-end-rebuild-kit-chevy-k2500-96-00.jpg)
Cure for the Clunk
DST Front End Rebuild Kit 226 offers you a convenient way to get all the replacement parts you need in one complete kit. Rather than searching for each part individually, we provide OEM of better quality ball joints, tie rods, and adjusting sleeves in one packagedeal, saving you time and money. Our front end rebuild kit will tighten your steering and help improve steering response, while also defending against misalignment and uneven tire wear.
Improved Ride Quality
There is nothing worse than having a reliable truck stuck in your garage due to bad ball joints and tie rods, which is why we wanted to offer a front end kit that can restore the life and ride quality of your k2500. If you want to get your K2500 back on the road, or you're tired of your co-workers poking fun at your truck as it bumps, clunks, and rattles down the road, then it's time to check out DST Front End Rebuild Kit 226 for the '96-'00 Chevrolet K2500 and K3500.
![](https://www.suspension.com/images/DST-Front-end-rebuild-kit-226/96-00-chevy-k2500-front-end-kit.jpg)