lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Idler Arms
Designed to connect your center link to the frame of your vehicle, an idler arm works to support your entire steering system. If you're having a hard time controlling your vehicle due to harsh vibrations or hazardous wobbling while driving, it's a good idea to check both your center link and your idler arm. Crafted to outperform OE replacements, Moog's idler arms are solid one-piece designs with all new hardware and grease fittings for serviceability. This durable design, coupled with the ability to flush out contaminants and re-grease the idler arm ensures that you'll not only restore your vehicle's performance, you'll also make it last much longer. Plus, Moog covers all of their idler arms with a lifetime warranty handled in-house here at DST.
Product Reviews for moog-k8739t | Idler Arm | Ford F-150 1997-2003
- 5 Star (2)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k8739t
starstarstarstarstar" Great quality "
Part went in real easy. Like the grease fittings. Filled them with a high quality grease.
verified_user Verified Buyer - William A. Kohn Jr - . MOOG moog-k8739t - 5 out of 5starstarstarstarstar" Beefy! "
MUCH beefier than a stock unit. Install was quick and painless and fixed the wobble in my steering (along with a new pitman arm). Note: As far as I know there is no way to tell which spacing you need (2.5" or 3.5") without calling ford or measuring on your vehicle, so order carefully.
verified_user Verified Buyer - HH - . MOOG moog-k8739t - 5 out of 5question_answer Customer Questions and Answers
- Question:
- How many grease fittings should part k8739t come with?
- Answer:
- Idler arm moog-k8739t should have 2 grease zerks.
- Question:
- Idler arm bracket pattern. How do I tell which one I need with out taking it off first.
- Answer:
- You do not have to remove the idler arm. Go to the right frame rail and look for the 2 bolts that attach the idler arm to the frame rail. Measure center to center of the bolts. That will let you know which idler arm you need.
- Question:
- How do I determent which idler arm I need do you measure the distance from center of top bolt to the center of bottom bolt?
- Answer:
- Go to the passenger side frame rail and look for the 2 bolts that attach the idler arm to the frame. Measure from the center of the top bolt to the center of the bottom bolt. If the spacing is 2.5 inches use the k8739t. If the spacing is 3.5 inches u use k8747. ...see more
- Question:
- Does part number k8739t come with the new dust boot?
- Answer:
- Yes, part number k8739t will come with the new dust boot.
- Question:
- What is the difference between part numbers K8747 and k8739t on my 1999 ford expedition 4x4?
- Answer:
- For the 1999 ford expedition 4x4, part number K8747 has 3.5 inches in between the mount holes and part number k8739t has 2.5 inches between the mounting holes.
- Question:
- I just got this replacement idler arm and it comes with 2 grease nipples. I only see fitment for a single nipple.
- Answer:
- One grease zerk is installed in the end cap on the bracket end ant the other zerk is screwed in the the tapered stud end.