Front Strut Arm Bushings - Ford F150 - MOOG moog-k8359

  • moog-k8359 Radius Arm Bushing

Radius Arm Bushing

Manufacturer: MOOG
Part Number: moog-k8359
Price: $39.02

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentRadius Arm Bushing moog-k8359 fits these vehicles:

Front Strut Arm Bushings - Ford F150 - MOOG moog-k8359

Moog's Strut Rod Bushings

The stock strut rod bushings installed on your vehicle are made of rubber. While rubber may be good at absorbing and redirecting vibrations, it doesn't last long. Prone to cracking at rotting away, rubber is guaranteed to eventually wear away. Moog's premium rubber strut arm bushings will restore your strut arms to the feel and performance your vehicle had when it was new. By replacing your OE with Moog's bushings, you can ensure that quiet and smooth ride you once had will be there once again. Moog covers their bushings with a lifetime warranty handled in-house here at DST.

Box4

question_answer Customer Questions and Answers


Question:
I have ordered new Moog K8359 radial arm bushings for my 1986 Ford F150. Do the bushings need to be coated with silicone grease at installation or what grease do you prefer or do they need lubricating at installation?
Answer:
Radius arm bushings do not need to be greased. If you want to grease them use a silicone based marine grade grease. Do not use chassis grease. It will degrade the rubber over time.

Question:
What are the specs of part number k8359?
Answer:
Part number k8359 has a height of 1.870 inches, a width of 2.610 inches, a thickness of .190 inches, the OD is 1.590 inches, and the ID is .880 inches.