unarchive In The Box of moog-k80252 keyboard_arrow_down
- Qty 1 Stabilizer Bar Link (Not sold in pairs)
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog's Sway Bar Endlinks
A sway bar, or anti-roll bar, is designed to keep all four wheels solidly in contact with the road, track, or trail during a turn. But your sway bar doesn't do this job alone. Sway bar endlinks connect the sway bar to the rest of your suspension. Without these links your sway bar would just hang there, taking up space. Similarly, if your links are damaged or worn then your sway bar will not be performing at it's best.
Moog's line of sway bar endlinks come in a variety of shapes and styles, each one designed specifically for the vehicle it's listed for. Known for their high-quality parts, Moog stays true to form with each of their endlink designs. Maximize your vehicle's performance and value with a set of Moog's sway bar endlinks, all covered by Moog's lifetime warranty handled in-house here at DST.
Product Reviews for moog-k80252 | Front Sway Bar End Link | 2005-2010 Chevrolet Cobalt
- 5 Star (1)
-
-
- 50%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (1)
-
-
- 50%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k80252
starstarstarstar_borderstar_border" Review 2 Years Later "
These are making noise already. Editor Note: End link k80252 is greaseable. The end link must be greased after installed and at every oil change. Re-grease the end link to see if the noise will go away.
verified_user Verified Buyer - Chuck Shannon - . MOOG moog-k80252 - 3 out of 5starstarstarstarstar" Well made "
I bought this for my 2008 HHR, a little worried as it was 1.8 inches longer than the original. My worries ended as it fit perfectly. This link has zerk fittings so you can grease the links, unlike the original. New struts, new link, no more front end clunking.
verified_user Verified Buyer - Bud Zilko - . MOOG moog-k80252 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Do they come pre-greased?
- Answer:
- moog-k80252 is pre-greased at the factory. It must me greased after installed and every oil change.
- Question:
- I am planning to purchase sway bar end link for my car. I was not sure about the part number. Is there any difference in passenger side and driver side? I only found
- Answer:
- moog-k80252 will fit the left or right sides.
- Question:
- What are the specs for the front strut sway bar links?
- Answer:
- The only specs I have are for the length. The center to center length is 11.881 inches.
- Question:
- Are these pre-greased or does one have to grease them before installation?
- Answer:
- moog-k80252 is greased after it is assembled. This to preserve the part while it sits on the shelf. The end link must be greased after it is installed and every oil change.
- Question:
- Is part number k80252 sold as a pair or individually?
- Answer:
- Part number k80252 is sold individually.
- Question:
- What are the torque specs for part number k80252?
- Answer:
- The torque specs for part number k80252 are 81 ft lb.
- Question:
- What type of grease is recommended for link kit K80252?
- Answer:
- You would use a HD chassis grease with the NLGI certification.
- Question:
- Does this product (K80252) include grease fittings?
- Answer:
- moog-k80252 is a greaseable sway bar end link.
- Question:
- MOOG-K80252 - Front Sway bar end link - 2012 Chevrolet Sonic LT 1.8 - Is this part a direct replacement for the OEM part and are they greaseable?
- Answer:
- Part number Moog-K80252 is not fitted for the 2012 Chevrolet Sonic. The correct link for your 2012 Chevrolet Sonic it would be part number Moog-K750630. Part number Moog-K750630 is a greasable endlink.