moog-k700525_rear | Rear Sway Bar End Link Replacement | Ford Focus

  • moog-k700525_rear Rear Sway Bar End Link
  • moog-k700525_rear Rear Sway Bar End Link

Rear Sway Bar End Link

Manufacturer: MOOG
Part Number: moog-k700525_rear
Price: $13.84

check_box In Stock check_box Ships Immediately


  • Qty 1 Stabilizer Bar Link (Not sold in pairs)
  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentRear Sway Bar End Link moog-k700525_rear fits these vehicles:
Details

moog-k700525_rear | Rear Sway Bar End Link Replacement | Ford Focus

Premium Sway Bar Link Kit

Moog has engineered a new line of end links to enhance durability and performance.

Moog Problem Solver: Sway Bar End Links

Raising the bar

Moog's Problem Solver sway bar link kits have raised the bar for OE replacement links. Targeting the easily corroded traditional non-socket style links, Moog has engineered a new line of end links to enhance durability and performance. The entire line of Moog's Problem Solver end links are available right here at DST and include a lifetime warranty.

Moog Problem Solver Bulletins: Sway Bar Endlinks
Moog Problem Solver Bulletins: Sway Bar Endlinks

Original design and other supplier's flaws

The traditional non-socket style sway bar link that is installed factory on vehicles is highly susceptible to early failure. The OE design, as well as many aftermarket suppliers, use a small diameter bolt on the sway bar link. This small size bolt opens up the link to the damaging effects of road shock and corrosion. If the smaller bolt isn't bad enough, these links utilize neoprene bushings that do not stand up well to stress and weather conditions. Many suppliers also use a rolled steel sleeve which can allow harmful contaminants in, leading to corrosion and early failure.

Moog problem solving features

Moog's problem solver parts target factory defects or poor original design, replacing them with a better more durable part. Moog's sway bar link set provides enhanced performance and increased durability. This new design includes polyurethane bushings. These polyurethane bushings are much more durable than the neoprene.

Moog Problem Solver Bulletins: Sway Bar Endlinks
Moog Problem Solver Bulletins: Sway Bar Endlinks

Durable hardware

A black oxide 3/8" Grade 8 bolt provides increase strength and corrosion protection. Paired with a barrel nut that provides proper thread engagement, these "problem solving" end links are much easier to install. Nested washers are included to help keep the bushings centered during installation. The T6 aluminum hex spacer keeps contaminants out and is anodized to prevent corrosion.

Sway Bar End link Part Numbers

Moog has engineered several sizes of end links to cover numerous vehicles. While the length varies depending on the vehicle, all of Moog's Problem Solver sway bar end links include these problem-solving features.

Moog Problem Solver Bulletins: Sway Bar Endlinks

question_answer Customer Questions and Answers


Question:
I bought the rear rear | Rear Sway Bar End Link Replacement | Ford Focus and it only came with one when it seems that there needs to be two. Am I supposed to buy two of them?
Answer:
All Moog end links are sold individually. If replacing the left and right sides you would purchase 2.

Question:
Is the box have 2pcs?
Answer:
All Moog end links are sold individually. Not in pairs.

Question:
Will part number k700525 fit my 2004 Ford Focus SVT?
Answer:
No, part number k700525 will not fit the 2004 Ford Focus SVT.

Question:
Can you ship k700525_rear to Australia?
Answer:
Yes, we can ship Part Number moog-k700525_rear worldwide.