lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Pitman Arms
Pitman arms are designed to connect your steering box to your center link or drag link. The force you apply when turning your steering wheel travels through the pitman arm and is then used to move the links and rotate your wheels. As the proverbial "middle man" of your steering system, the pitman arm is incredibly important. A worn pitman arm will have an obvious affect on your handling. Sloppy or unresponsive steering, as well as wobbling and vibrations while driving, are common signs of a worn pitman arm. Moog offers its series of pitman arms, all made to meet or exceed OE specifications. Crafted as solid, one-piece components, Moog's pitman arms are well equipped to both outperform and outlast the OE. By upgrading to a Moog pitman arm, you'll not only restore your vehicle's steering performance, but you'll also make it last much longer. Additionally, Moog covers all of their pitman arms with a lifetime warranty handled in-house here at DST.
*Some kits include all new hardware including castle nut, cotter pin, etc. If you need new hardware check to be sure it is included in the kit.
Product Reviews for moog-k6582 | Pitman Arm | Chevrolet Nova 1970-1972
- 5 Star (2)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k6582
starstarstarstarstar" Review 2 Years Later "
Have had 0 problems with your parts, but I maybe have 50 miles on the Camaro since finished.
verified_user Verified Buyer - Clifford Boeckman - . MOOG moog-k6582 - 5 out of 5starstarstarstarstar
Ok, no problems with this part, very good quality.
verified_user Verified Buyer - Luciano Lorenzi - . MOOG moog-k6582 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Moog-K6582 - Pitman Arm - 1968 Pontiac Firebird - Is this pitman arm correct for my application?
- Answer:
- Moog-K6582 will fit a 68 Firebird that has Power Variable Steering. If you do not have the Variable Steering you will need part number Moog-K6151. If you have the Manual Steering you will need part number Moog-K6150.
- Question:
- My 67 firebird has quick ratio power steering. The pitman arm on it currently is curved. I noticed this one is straight. I also noticed in the description for Part number 6582 on the search page it says
- Answer:
- K6582 only fits the 230 inline 6 Firebird. Moog does not make another pitman arm.
- Question:
- Where are the parts made and where can I get Moog parts specifically made in Germany?
- Answer:
- Moog parts are made all over the world. We would not be able to specify a certain country for a part you order.
- Question:
- What is the length from center of splined hole to center of ball stud?
- Answer:
- moog-k6582 center to center length is 5.780 inches.