MOOG 6319 Rear Coil Springs - Pair

  • moog-6319 Rear Coil Springs - Pair

Rear Coil Springs - Pair

Manufacturer: MOOG
Part Number: moog-6319
Price: $122.30

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentRear Coil Springs - Pair moog-6319 fits these vehicles:
1967
  • ...view more fitment ...
  • Moog's Coil Springs

    Designed to be more than OE replacements, Moog's coil springs come with a variety of shapes and ends. This selection, combined with Moog's lifetime warranty handled right here at DST, lends security to whichever choice you might make. While they are certainly higher quality than the OE springs, each of Moog's coil springs were designed to still have the same spring rate. Having the same spring rate allows for an easier install and a more accurate restoration for your vehicle's ride.

    End Type

    Coil Springs have three types of ends: Square, Tangential and Pigtail. It is important that you select a coil spring that matches BOTH your end types, otherwise the coil spring won't fit. Your OE coil spring could have the same type ends, or a combination of both.

    Moog Universal Coil Springs Squared

    Type 1: Squared

    With a Squared end, the final coil is bent back to touch the coil before it. The easiest way to know if you have a squared end is to stand the coil spring straight up. A squared end will let the spring sit flat on the ground and stay standing.

    Type 2: Tangential

    A Tangential end looks like it would just keep on going forever if the spring continued. The last coil is not bent back and it is not the pigtail (see below). Instead, the tangential coil spring looks as though a normal coil was just cut, otherwise, it would have kept winding on forever. If you tried to stand it up straight, it would fall.

    Moog Universal Coil Springs Squared
    Moog Universal Coil Springs Squared

    Type 3: Pigtail

    The Pigtail is probably the easiest to identify. Its defining characteristic is the pig tail shape at the end. The final coil is squared off, but is a much smaller diameter than the rest of the spring.

    Spring Type

    Moog offers two types of springs for a universal fitment: Constant Rate and Variable Rate.

    Constant Rate

    Moog Constant Rate coil springs return your vehicle to the original specifications. The rate at which the spring compresses and rebounds remains constant regardless of the amount of load on the spring. These coil springs are heat treated, have a weather resistant finish and use a urethane protective tube.

    Moog Universal Coil Springs Bar Diameter
    Moog Universal Coil Springs Bar Diameter

    Variable Rate

    Moog Variable Rate coil springs can be used as an original replacement or an upgrade to carry heavier loads. The resistance changes as the spring compresses, becoming progressively stiffer as the load on the springs increase. The springs include a "comfort range" with tightly spaced coils to give a smooth ride, and include a "load range" with widely spaced coils to minimize deflection and maintain chassis height when the vehicle load increases.

    Fitment for moog-6319
    MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
    ChevroletChevelle1970-1969Rear Quantity 1 5.7L V8 350cid
    ChevroletChevelle1970-1968Rear Quantity 1 4.1L L6 250cid
    ChevroletChevelle1969-1968Rear Quantity 1 3.8L L6 230cid
    ChevroletChevelle1969-1968Rear Quantity 1 4.1L L6 4098cc/250cid
    ChevroletChevelle1969-1968Rear Quantity 1 5.0L V8 307cid
    ChevroletChevelle1969-1967Rear Quantity 1 3.8L L6 3769cc/230cid
    ChevroletChevelle1969-1967Rear Quantity 1 4.1L L6 4097cc/250cid
    ChevroletChevelle1969Rear Quantity 1 6.5L V8 396cid
    ChevroletChevelle1969Rear Quantity 1 6.5L V8 6489cc/396cid
    ChevroletChevelle1968-1967Rear Quantity 1 5.3L V8 5358cc/327cid
    ChevroletChevelle1968-1967Rear Quantity 1 5.4L V8 327cid
    ChevroletChevelle1967Rear Quantity 1 4.6L V8 283cid
    ChevroletChevelle1967Rear Quantity 1 4.6L V8 4638cc/283cid
    ChevroletMalibu1967Rear Quantity 1 3.8L L6 3769cc/230cid
    ChevroletMalibu1967Rear Quantity 1 4.1L L6 4097cc/250cid
    ChevroletMalibu1967Rear Quantity 1 4.6L V8 4638cc/283cid
    ChevroletMalibu1967Rear Quantity 1 5.3L V8 5358cc/327cid
    OldsmobileCutlass1967Rear Quantity 1 4.1L L6 250cid
    OldsmobileCutlass1967Rear Quantity 1 4.1L L6 4098cc/250cid
    OldsmobileCutlass1967Rear Quantity 1 5.4L V8 5409cc/330cid
    PontiacGTO1970Rear Quantity 1 6.6L V8 400cid
    PontiacGTO1970Rear Quantity 1 7.5L V8 455cid
    PontiacLeMans1970Rear Quantity 1 4.1L L6 250cid
    PontiacLeMans1970Rear Quantity 1 5.7L V8 350cid
    PontiacLeMans1967Rear Quantity 1 3.8L L6 3769cc/230cid
    PontiacLeMans1967Rear Quantity 1 5.3L V8 5343cc/326cid
    PontiacTempest1967Rear Quantity 1 3.8L L6 3769cc/230cid
    PontiacTempest1967Rear Quantity 1 5.3L V8 5343cc/326cid

    question_answer Customer Questions and Answers


    Question:
    What is the spring rate for 6319?
    Answer:
    Part number 6319 has a spring rate of 119 lbs per inch and the load rate is 616 lbs. Part number 6381 has a spring rate of 198 lbs per inch and a load rate of 1062 lbs.

    Question:
    What is the difference between the 5409 and 6319 springs?
    Answer:
    The 5409 springs have a spring rate of 143 lbs per inch and the installation height is 7.50 inches. The 6319 springs have a spring rate of 119 lbs per inch and an installation height of 9.0 inches.