moog-es3712 | Front Outer Tie Rod End | 93-16 Subaru Impreza | MOOG

  • moog-es3712 360image 1
  • moog-es3712 Front Outer Tie Rod End
  • moog-es3712 Front Outer Tie Rod End
  • moog-es3712 Front Outer Tie Rod End
  • moog-es3712 Front Outer Tie Rod End
  • moog-es3712 360image large 1

Front Outer Tie Rod End

Manufacturer: MOOG
Part Number: moog-es3712
Price: $42.88

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

Cross Reference from moog-es3712 to beckarnley-101-4585
Beck Arnley beckarnley-101-4585
.
Price: $36.57
Warranty: 3 Years or 50000 Miles

question_answer Ask us a Question

FitmentFront Outer Tie Rod End moog-es3712 fits these vehicles:

moog-es3712 | Front Outer Tie Rod End | 93-16 Subaru Impreza | MOOG

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.

Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

Fitment for moog-es3712
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
SubaruB9 Tribeca2007-2006Outer Quantity 2
SubaruBaja2006-2003Outer Quantity 2
SubaruCrosstrek2017-2016Outer Quantity 2
SubaruForester2018-1998Outer Quantity 2
SubaruImpreza2016-1997Outer Quantity 2
SubaruImpreza1996-1993OuterAWD Quantity 2
SubaruLegacy2014-1993Outer Quantity 2
SubaruOutback2014-2000Outer Quantity 2
SubaruTribeca2014-2008Outer Quantity 2
SubaruWRX2018-2013Outer Quantity 2
SubaruWRX2015Outer Quantity 2 2.0L H4 1998cc/122cid
SubaruWRX STI2018-2013Outer Quantity 2
SubaruXV Crosstrek2015-2013Outer Quantity 2

question_answer Customer Questions and Answers


Question:
I bought outer tie rods for my Subaru Legacy and wanted to make sure they are pre greased before I install them.
Answer:
moog-es3712 is pre-greased after the tie rod is assembled. This is to preserve it while it sits on the shelf. It must be greased after it is installed and every oil change.

Question:
What are the overall dimensions?
Answer:
Here are the dimensions for es3712: End 1 Thread Diameter (MM) 14.0 Dust Boot Included Yes End 2 Thread Diameter (MM) 12.0 Greaseable Yes End 1 Thread Direction Clockwise End 2 Thread Pitch (MM) 1.25 End 1 Thread Pitch (MM) 1.5 Length h - Stud Center To End (IN) 5.430 ...see more

Question:
Will part number es3712 come pre-greased?
Answer:
No, part number es3712 does not come pre-greased. You will need to grease it after installation and then again at every oil change.

Question:
Does this outer tie rod end come pre greased?
Answer:
moog-es3712 after it assembled grease injected into the tie rod after it is assembled. This is to preserve the part while it sits on the shelf. The tie rod must be greased after it is installed and every oil change with HD chassis grease that has NLG GI certification. ...see more