lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts.
Grant Lewis- DST Parts GeekMoog Wheel Bearing and Hub Assemblies
Don't Live With All of Those Noises
Wishing you could get rid of that annoying grinding noise? You've probably been hearing it for a while, and the mechanic just said your wheel bearing and hub assembly needs replacing. Take it from the DST parts experts, go with a premium solution: Moog's wheel bearing and hub assemblies.
OE Design Flaws
The OE design of wheel bearing and hub assemblies is shoddy at best. Common symptoms of a failed OE wheel hub are:
- Loose wheels leaning into the vehicle
- Premature tire wear and poor handling
- Snapping or clicking noise on turns
- Humming or rattling when driving straight
- Anti-lock Braking System (ABS) light is on
If you are experiencing any of these issues, get your vehicle checked out immediately.
Roll Form Design
All of Moog's Wheel Hub Assemblies are engineered to target these OE problems. One such feature is Moog's innovative roll form design. Moog's roll form design ensures consistent and optimal pre-load in your hub. With grease now equally spreading throughout the hub, the longevity of your wheel bearing and hub assembly increases greatly.
ABS Molded Shield and Socket Connections
Moog's wheel bearing and hubs also feature an ABS with molded shield and socket connections. This provides maximum defense against contamination. With this addition, Moog's hubs are much more resistant to the premature wear that plagues OE hub assemblies.
Moog Abrasion-Resistant ABS Cord
Moog wheel hub assemblies include an ABS cord coated with a blended material designed to provide superior ABS protection. This helps increase abrasion resistance and protects against adverse conditions. Unlike the OE ABS cords, Moog's cords will last longer and resist cuts or rips much better than the OE design.
Quad Lip Seal Design
Moog's hub assemblies come equipped with a quad lip seal design. The design provides a securely-sealed environment that the OE design doesn't have. This, yet again, makes Moog's hubs more resistant to contamination, which will help extend the life of the part.
Precision Match Components
When you buy a Moog wheel hub assembly from our warehouse in Stephenville, you can be assured that the components are precision matched. Moog sees to this by strictly controlling the manufacturing process to ensure exact matching of bearings and rolling elements, delivering superior performance and minimizing noise and vibration.
Coated Wheel Stud Bolts
The wheel studs on Moog hub assemblies feature a protective coating that helps prevent rust and corrosion. The protective coating will allow easier removal and proper torquing of the wheel, cutting down on installation time and any future servicing that you might have.
Parts Engineered to the Highest of Standards
Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts. Moog hub assemblies are performance-proven, quality-tested, and are available for many vehicles, both foreign and domestic. If that wasn't enough, Moog's wheel bearing and hub assemblies also come with a 3-year warranty that, if you should ever need it. If you need a little help finding a Moog wheel hub assembly for your vehicle then don't hesitate to call DST's customer service team, they'll be happy to help you with anything you may need.
Product Reviews for moog-513115 | Front Wheel Hub Assembly | 1994-2004 Ford Mustang
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-513115
starstarstarstarstar" Nice parts - Good Quality "
I was very happy with the quality of the MOOG Wheel Bearing and Hub Assemblies. After inspecting many parts at the auto parts store I went with the MOOG parts namely because of their sealed bearings. Other brands of lesser quality had open non-sealed bearings where dirt and water could enter and shorten the lifespan of the part. I went with MOOG Tie rod ends and Lower A-Arms also. My 2004 Mustang better be happy. It was alot of work.
verified_user Verified Buyer - Deborah Price - . MOOG moog-513115 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- What is the anti-seize on the front of part number Moog-513115 used for?
- Answer:
- Anti-seize is used to keep the wheel from from rusting or seizing to the hub.
- Question:
- Is this hub assembly pre-lubricated, or do I need to apply grease?
- Answer:
- Moog-513115 after it hub and bearing are assembled it is greased and sealed. No further maintenance is needed.
- Question:
- I purchased a new Moog wheel bearing hub assembly (#515081). Many people on YouTube say to add grease thru the ABS sensor hole.... Is this recommended to extend life of bearing,?
- Answer:
- Moog hub assembly 513115 does not have a speed sensor. It has an encoder built into the hub assembly. The hub assembly is greased after the part is built and sealed. It needs no grease injected into the assembly at any time.
- Question:
- I want to know if this hub and bearing kit moog-513115 | Front Wheel Hub Assembly comes with grease caps?
- Answer:
- Moog hub assemblies are greased at the factory and sealed. They are maintenance free.
- Question:
- Will part 513115 fit my 5 lug 1986 Ford Mustang?
- Answer:
- No, part 513115 will only fit the 94-2004 Ford Mustang.
- Question:
- Are the Moog front hubs pre-greased or do I have to pack the bearing?
- Answer:
- moog-513115 was greased before final assembly and sealed. It needs no further maintenance.
- Question:
- Does this bearing need to repacked with grease?
- Answer:
- Part number Moog-513115 is a sealed unit that does not need to be greased.
- Question:
- Does Moog-513115 include the ABS?
- Answer:
- No, Part Number moog-513115 does not have the ABS sensor. The tone ring only.
- Question:
- What are the dimensions of part number Moog-513115?
- Answer:
- Flange Diameter: A 139.0 Bolt Circle Diameter: B 4.500 Bolt Circle Diameter : 114.3 Bolt Size: 1/2 - 20 Wheel Pilot Diameter: 70.5 Brake Pilot Diameter: 71.0 Hub Pilot Diameter: 100.0 Wheel Stud Quantity: 5 ABS Sensor: Tone Ring Location: Fr ront Wheel ...see more