Front End Alignment Kit - Toyota Tacoma - moog-k100127

  • moog-k100127 Front Alignment Caster/Camber Kit
  • moog-k100127 Front Alignment Caster/Camber Kit

Front Alignment Caster/Camber Kit

Manufacturer: MOOG
Part Number: moog-k100127
Price: $86.38

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Alignment Caster/Camber Kit moog-k100127 fits these vehicles:
Details

Front End Alignment Kit - Toyota Tacoma - moog-k100127

Provides a plus or minus 1.5 degree camber/caster adjustment.

Moog Alignment Parts

Caster or Camber issues? Moog has got you covered with their line of alignment parts. Moog's engineers have designed this part to give you adjustability and flexibility with the alignment angles in your suspension. Whether caster, camber, or both, Moog's alignment parts will set your suspension up better than when you first drove the vehicle off the lot.

Box4
MOOG moog-k100127

Product Reviews for Front End Alignment Kit - Toyota Tacoma - moog-k100127

5 Star (0)
0%
4 Star (0)
0%
3 Star (0)
0%
2 Star (1)
100%
1 Star (0)
0%
starstarstar_borderstar_borderstar_border

MOOG moog-k100127

2 out of 5 based on 1 user reviews. Write a Review

A
verified_user

starstarstar_borderstar_borderstar_border" Good "

Front bolts barely long enough. Not a full nut. Editors Note: You want at least 2 threads exposed after tightening the bolt to OEM spec.

verified_user Verified Buyer - - . MOOG moog-k100127 - 2 out of 5

question_answer Customer Questions and Answers


Question:
How much camber does part number k100127 provide?
Answer:
Part number k100127 provides negative 1.5 degrees to positive 1.5 degrees of camber.

Question:
Is all of the hardware made of steel?
Answer:
All the hardware in moog-k100127 is steel.

Question:
Is K100127 the correct caster/camber kit?
Answer:
I am showing that part number K100127 is the correct front alignment caster/camber kit for your Tundra.

Question:
Will part number k100127 do both sides or will I need to order 2 sets?
Answer:
You will need to order 2 of part number k100127 to do both sides.

Question:
Does this kit come with two bolts? One for caster and one for camber or is it just one bolt per package?
Answer:
moog-k100127 has 2 bolts, nuts, inner sleeves, grease zerks and 4 eccentrics. The kit will adjust camber/caster together.

Question:
Is the part MOOG-K100127 greaseable?
Answer:
Yes moog-k100127 have greaseable bolts.